HVP- 90 series
HVP-90 series
Het monteren van een nieuwe motor onder een machine is maatwerk.
Welke functies moeten worden geactiveerd?
Welke instellingen moeten worden geprogrammeerd? ( bv. voor- en eindafhechting, persvoetlichting, draadafknipper etc.)
Welke motor wilt U hebben? ( 550, 750 w)
Wilt U zelf de motor monteren?
U begrijpt dat het afgeven van een prijs "maatwerk" is .
Als U aangeeft wat U wensen zijn, kunnen wij U prijsopgave maken.
HVP-90 series is Ho Hsing's most universal model. With the solid and strong motor the HVP-90 is suitable for many lockstitch and chainstitch applications. Starting or stopping by photocell, air suction, needle cooling, HP function or flip flop output, HVP-90 can do it all.
| Features: |
| 1 | One shot positioning |
| 2 | Highly accurate positioning ± 3° |
| 3 | Powerful operation box: parameters programmable,
built in EEPROM can manage and
store the parameter setting |
| 4 | Solenoid over current protection |
| 5 | Low noise, low vibration and low power consumption |
| 6 | Software / hardware 2-way protection system |
| 7 | Multi positioning mode |
| 8 | Selectable solenoid output voltage (24 V / 30 V) |
| 9 | Selectable synchoniser voltage (5 V / 12 V) |
| 10 | Powerful parameter system, easy adjustment and
upgradeable |
| Functions | HVP-90-4 |
| Motor type | 550 W - 3000 rpm
750 W. - 2000 rpm |
| Power voltage range | Single Phase:100 - 120 V / 200~240 V |
| Available pulley size | 50-130 mm
(Standard:100 mm) |
| One shot positioning | √ |
| Needle Up / down | √ |
| Slow Start | √ |
| Presser Foot Lifter | √ |
| Trimmer & Wiper | √ |
| Automatic Back tacking | √ |
| Reverse at Stop | √ |
| Power Transistor Protection | √ |
| Power Module Protection | √ |
| Input Signal Port | 13 |
| Solenoid Signal Output Port | 8 |
| Edge Sensor Input Port | 2 |
| Gross Weight | 11.5 kgs |
| Packing Dimension | L x W x H = 424 x 409 x 355 mm. |
All-In-One Model |
If you want a motor that matches various brands of sewing machines including
Lockstitch and Interlockstitch, the universal type HVP-90-4-11 is a good choice. With a selectable output voltage for solenoids and synchroniser, the HVP-90-4-11 can be used on many lockstitch and chainstitch machine brands. |
Op voorraad: Nee
Prijs: € 0.00
